{"id":6958,"date":"2017-05-08T08:24:38","date_gmt":"2017-05-08T08:24:38","guid":{"rendered":"https:\/\/www.profactor.at\/?page_id=6958\/"},"modified":"2018-04-11T13:41:41","modified_gmt":"2018-04-11T13:41:41","slug":"speaker-addit-2017","status":"publish","type":"page","link":"https:\/\/www.profactor.at\/en\/events\/addit-2020\/former-events-addit\/addit-2017\/speaker-addit-2017\/","title":{"rendered":"Speaker – Add+it 2017"},"content":{"rendered":"

[vc_row][vc_column width=”3\/4″][vc_column_text]

<\/div>
<\/div><\/div>[\/vc_column_text][vc_column_text]In 2017, the 3rd edition of the Add+it (Symposium on ADDitive Manufacturing and Innovative Technologies), focused on polymers, will take place on September 28 – 29, 2017, in Steyr, AT.<\/p>\n

Plenary speakers – Add+it 2017:
\n<\/strong><\/h2>\n

[\/vc_column_text][vc_column_text]<\/p>\n\n\n\n\n\n\n\n\n
\"\"<\/td>\n\"\"<\/td>\n\u00a0\"\"<\/td>\n<\/tr>\n
\n

Prof. Dr. Mirko Meboldt<\/strong><\/p>\n

ETH Zurich
\nChair of Product Dev.& Eng. Design<\/a>, Schwitzerland<\/p>\n

 <\/td>\n

Tom Mulholland<\/strong><\/p>\n

Polymer Engineering Center,
\nUniversity of Wisconsin-Madison<\/a>, Madison, USA<\/p>\n

 <\/td>\n

Daniel Siegel<\/strong><\/p>\n

Alfred Wegener Institute<\/a>, Elise Group<\/a>, Germany<\/p>\n

 <\/td>\n<\/tr>\n

\"\"<\/td>\n\"\"<\/td>\n\"\"<\/td>\n<\/tr>\n
Dr. Ing. Bogdan Dyba\u0142a<\/strong><\/p>\n

Wroclaw University of Technology,
\nCenter for Advanced Manufacturing Technologies<\/a>,\u00a0Fraunhofer Project Center, Polen<\/p>\n

 <\/td>\n

Dr. Ing. Benoit Herman<\/strong><\/p>\n

Louvain Bionics Coordinator,
\nUniversit\u00e9 Catholique de Louvain<\/a>,
\nBelgium<\/p>\n

 <\/p>\n

 <\/td>\n

Dr. Roger Assaker<\/strong><\/p>\n

e-Xstream Engineering<\/a> & Chief Material Strategist, MSC Software, Belgium<\/p>\n

 <\/p>\n

 <\/p>\n

 <\/td>\n<\/tr>\n

\u00a0\"\"<\/td>\n\"\"<\/td>\n\u00a0\"\"<\/td>\n<\/tr>\n
Dr. Margherita Cioffi<\/strong><\/p>\n

Rina Consulting\u00a0S.p.A.<\/a>\u00a0,
\nAM-motion project<\/a>, Italy<\/td>\n

C\u00e2ndida Mal\u00e7a<\/strong><\/p>\n

Centre for Rapid and Sustainable Product Development of Polytechnic Institute of Leiria<\/a>, Portugal<\/td>\n

\n

Thomas Willinger<\/strong><\/p>\n

Siemens Industry Software GmbH<\/a>, Digital Factory Division, Austria<\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

[\/vc_column_text][vc_column_text]<\/p>\n

Session Speakers – Add+it2017<\/h2>\n

Material Development for AM<\/u><\/strong> <\/span><\/h3>\n

(Session Chair: Prof Major, JKU)<\/span><\/p>\n

 <\/p>\n\n\n\n\n\n\n\n
\"\"<\/strong><\/td>\n\"\"<\/td>\n\u00a0\"\"<\/strong><\/td>\n<\/tr>\n
DI Dr. Andreas Haider<\/strong><\/p>\n

Kompetenzzentrum Holz GmbH<\/a>, Austria<\/p>\n

\u00a0<\/strong><\/p>\n

 <\/td>\n

Dennis Graf<\/strong><\/p>\n

Karlsruhe Institute of Technology (KIT)<\/a>
\nIAM-WK, Germany<\/p>\n

 <\/p>\n

 <\/td>\n

\u00a0Markus Kaltenbrunner<\/strong><\/p>\n

EVO-tech<\/a>, Austria<\/p>\n

\u00a0<\/strong><\/p>\n

 <\/td>\n<\/tr>\n

\"\"<\/td>\n<\/td>\n\u00a0<\/strong><\/td>\n<\/tr>\n
Dr. Thomas Fischinger<\/strong><\/p>\n

PROFACTOR,<\/a> Austria<\/p>\n

 <\/td>\n

Ommeaymen Sheikhnejad-Bishe PhD <\/strong><\/p>\n

JKU IPPE<\/a>, Austria<\/p>\n

 <\/td>\n

Karsten Schlichter<\/strong><\/p>\n

Bluestar Silicone<\/a>, France<\/td>\n<\/tr>\n

<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

[\/vc_column_text][vc_column_text]<\/p>\n

Additive Manufacturing for Medical Applications<\/u><\/strong> <\/span><\/h3>\n

(Session Chair: Dr. H-P. Huber, Medical Cluster)<\/span><\/p>\n

 <\/p>\n\n\n\n\n
\u00a0\"\"<\/td>\n\"\"<\/td>\n\u00a0\"\"<\/strong><\/td>\n<\/tr>\n
Philip Czapka<\/strong><\/p>\n

Fraunhofer Institute for Manufacturing Engineering and Automation IPA<\/a>, Germany<\/p>\n

 <\/td>\n

Dr. Simon Gruber<\/strong><\/p>\n

W2P Engineering<\/a>, Austria<\/p>\n

 <\/p>\n

 <\/td>\n

\u00a0Ralf Schumacher<\/strong><\/p>\n

University of Applied Sciences Northwestern <\/a>Switzerland<\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

[\/vc_column_text][vc_column_text]<\/p>\n

National flag ship project \u201eAddmanu\u201c<\/u><\/strong><\/span><\/h3>\n

(Session Chair: Prof J. Stampfl, TU Wien)<\/p>\n

 <\/p>\n\n\n\n\n\n\n
\"\"<\/td>\n\"\"<\/strong><\/td>\n\u00a0\"\"<\/td>\n<\/tr>\n
Dr. Gerald Mitteramskogler\u00a0<\/strong><\/p>\n

Lithoz<\/a>, Austria<\/td>\n

Martin Sp\u00f6rk<\/strong><\/p>\n

Montanuniversit\u00e4t Leoben<\/a>, Austria<\/td>\n

 <\/p>\n

\u00a0Dr. Michael M\u00fchlberger<\/strong><\/p>\n

PROFACTOR,<\/a> Austria<\/p>\n

 <\/td>\n<\/tr>\n

\u00a0\"\"<\/td>\n\u00a0\"\"<\/td>\n<\/td>\n<\/tr>\n
 <\/p>\n

Christopher Wiednig<\/strong><\/p>\n

voestalpine Additive Manufacturing Center<\/a>, Germany<\/td>\n

Dr. Dieter Holzinger<\/strong><\/p>\n

Tiger Coatings,<\/a> Austria<\/td>\n

<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

[\/vc_column_text][vc_column_text]<\/p>\n

Micro\/Nano Additive Manufacturing<\/u><\/strong><\/span><\/h3>\n

(Session Chair: Dr. Th. Fischinger, PROFACTOR)<\/p>\n

 <\/p>\n\n\n\n\n
\u00a0\"\"<\/td>\n\u00a0\"\"<\/td>\n\u00a0\"\"<\/strong><\/td>\n<\/tr>\n
Dr. Markus Pfaffinger<\/strong><\/p>\n

cubicure<\/a>, Austria<\/p>\n

 <\/td>\n

Ass. Prof. Francesco Moscato<\/strong><\/p>\n

Medical University\u00a0Vienna<\/a>
\nCenter for Medical Physics and Biomedical Engineering, Austria<\/td>\n

Dr. Jochen Zimmer<\/strong><\/p>\n

Nanoscribe<\/a>, Germany<\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n
\u00a0\"\"<\/td>\n\u00a0\"\"<\/td>\n<\/tr>\n
\u00a0Michael Haslinger<\/strong><\/p>\n

PROFACTOR<\/a>, Austria<\/td>\n

\u00a0Dr. Ladislav Kuna<\/strong><\/p>\n

Joanneum Research<\/a>, Austria<\/td>\n

<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

[\/vc_column_text][vc_column_text]<\/p>\n

Integrated Electronics<\/u><\/strong><\/span><\/h3>\n

(Session Chair: Dr. Markus Koppe, smart plastic initiative)<\/p>\n

 <\/p>\n\n\n\n\n\n\n
\u00a0\"\"<\/strong><\/td>\n\"\"<\/strong><\/td>\n\u00a0\"\"<\/strong><\/td>\n<\/tr>\n
Dr. Patrick Galliker<\/strong><\/p>\n

Scrona<\/a>, Schwitzerland<\/p>\n

 <\/td>\n

Dr. Volker Z\u00f6llmer<\/strong><\/p>\n

Fraunhofer Institute for Manufacturing Technology and Advanced Materials <\/a>(IFAM), Germany<\/td>\n

Dr. Fernando de la Vega<\/strong><\/p>\n

P<\/a>V Nano Cell<\/a>, Isreal<\/p>\n

 <\/td>\n<\/tr>\n

\u00a0\"\"<\/strong><\/td>\n\u00a0\"\"<\/td>\n\u00a0<\/strong><\/td>\n<\/tr>\n
Prof. Dr. Dieter Suess<\/strong><\/p>\n

University of \u00a0Vienna, Austria<\/td>\n

Roman Lassnig<\/strong><\/p>\n

RISE Acreo<\/a>, Sweden<\/td>\n

<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

[\/vc_column_text][vc_column_text]<\/p>\n

Additive Product Engineering<\/u><\/strong> <\/span><\/h3>\n

(Session Chair: Dr. M. Reiter JKU IPPE and W. Bohmayr, Kunststoffcluster)<\/p>\n

 <\/p>\n\n\n\n\n\n\n
\u00a0\"\"<\/td>\n\u00a0\"\"<\/td>\n\u00a0\"\"<\/strong><\/td>\n<\/tr>\n
Arko Steinwender<\/strong><\/p>\n

Fraunhofer Austria Research<\/a><\/p>\n

 <\/td>\n

Prof. Dr. Bernhard Heiden<\/strong><\/p>\n

Carinthia University of Applied Sciences<\/a>, Austria<\/p>\n

 <\/td>\n

Bernhard Mayrhofer<\/strong><\/p>\n

Canon Austria GmbH<\/a>, Austria<\/p>\n

 <\/td>\n<\/tr>\n

\u00a0\"\"<\/td>\n\u00a0\"\"<\/td>\n<\/td>\n<\/tr>\n
 <\/p>\n

Martin Reiter<\/strong><\/p>\n

JKU IPPE<\/a>, Austria<\/td>\n

Gabriel D\u00e4mmer<\/strong><\/p>\n

Festo<\/a>, Germany<\/td>\n

<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

[\/vc_column_text][vc_column_text]Mini-Maker Fair (September 29-30)
\n<\/strong>\u00a0There is the possibility to visit the new Maker Space of Steyr during the\u00a0Mini-Maker-Fair<\/a> on September 29 from 14:00 to 19:00.\u00a0Makers come to show their creations and share their learnings. A 3D-printing LAB with novel technologies is part of the maker space.\u00a0The association “Steyr Werke” \u00a0establishes the\u00a0maker space<\/a> in Musuem Arbeitswelt (Symposium location) in April 2017. The maker space is situated at the ground floor of the symposium location.<\/p>\n

 <\/p>\n

PROGRAM 2016<\/h2>\n

\"\"<\/a>Here you can download the program of the Add+it 2016<\/a>.<\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

Feel free to contact us, in case of any questions<\/p>\n

contact@null<\/span>addit2017.org\u00a0<\/a><\/p>\n

 <\/p>\n

Dr. Thomas Fischinger<\/strong><\/p>\n

PROFACTOR GmbH<\/strong>
\nIm Stadtgut A2 | 4407 Steyr-Gleink | Austria
\nTel. +43(0)7252 885-101[\/vc_column_text][\/vc_column][vc_column width=”1\/4″ el_class=”page-sidebar page-reference-sidebar”][vc_column_text el_class=”reference-person”]<\/p>\n

\n
\n
\n

<\/p>\n<\/div>\n

\n

Your Contact<\/h4>\n

Verena Musikar BA MSc<\/strong>
\nCorporate Communication<\/p>\n

+43 72 52 885 142
\nverena.musikar@null<\/span>profactor.at<\/p>\n<\/div>\n<\/div>\n<\/div>\n

[\/vc_column_text][vc_column_text el_class=”cta-area”]<\/p>\n

Register now!<\/h3>\n

Registration<\/a>[\/vc_column_text][vc_column_text el_class=”cta-area”]Program Add+it 2017<\/a><\/p>\n

Partners<\/a>\u00a02017<\/p>\n

Program Add+it 2016<\/a>[\/vc_column_text][vc_column_text el_class=”cta-area”]<\/p>\n

We answer …<\/h3>\n

… your questions<\/a>[\/vc_column_text][\/vc_column][\/vc_row]<\/p>\n