Thursday, 23 of November of 2017

News & Events

 

 EVENTS

 

11th – 12th July 2012 Gijon, Spain Project Meeting & Final Training Session
8th – 12th May 2012 Stuttgart, Germany Control 2012
22nd – 23rd February 2012 Padua, Italy Project Meeting & Training Session #3
5th – 6th October 2011 Hiiumaa, Estonia Project Meeting & Training Session #2
19th of July 2011 Brussels, Belgium Review Meeting
27th – 28th April 2011 Gijon,Spain Project Meeting
14th – 15th December 2010 Padua, Italy Project Meeting & Training Session #1
14th – 15th September 2010 Steyr, Austria KickOff-Meeting

 

NEWS

27th of November 2012, Best Paper Award for 3DComplete paper at IEEE International Symposium on RObotic and Sensors Environments (ROSE 2012),  with the paper about the new automatic calibration routine devised for 3DComplete: Edmond So, Stefano Michieletto, and Emanuele Menegatti; “Calibration of a Dual-Laser Triangulation System for Assembly Line Completeness Inspection”; IEEE International Symposium on RObotic and Sensors Environments; Magdeburg, Germnay; 2012, pp.138-143.

Congratulations to the authors.

 

11th & 12thof July 2012, Project Meeting and Final Training Session in Gijon, Spain

IMAG0129
The first day of this meeting was dedicated to administrative issues and technical presentations of work done since the last meeting.

During the second day of the project meeting the final training session was held and was dedicated to detailed presentation of developed prototypes and achieved results.

In the evening of the first meeting day the partners enjoyed a tour through historig Gijon and traditional Dinner.

 

 

 

August 2012
Logo_UniOviThe 3DComplete consortium welcomes University of Oviedo as new project partner.
 

 

 

8th till 11thof May 2012, CONTROL 2012, Stuttgart, Germany

The 3DComplete project consortium presented their project results at the CONTROL fair in Stuttgart, Germany (Hall 1, Booth 1074):

836 exhibitors from 31 countries around the world, 24.853 visitors from 88 nations and 55.000m² exhibition space makes the CONTROL Fair the leading trade fair for all aspects of quality assurance.

Two prototypes have been presented to the international visitors. One of them demonstrated the possibilities of using ortho- image technology. The second one demonstrated both 2.5D scanning technologies (colour and monochrome) combined with virtual sensor technology. Especially the combination of 3D and 2D within one physical sensor attracted many visitors and was starting point for some interesting discussions about possible applications for this technolgy.

 

22nd & 23rd of February 2012, Project meeting & Training Session #3, Padova, Italy
The first day of this meeting was dedicated to administrative issues and technical presentations of work done since the last meeting. During the second day of the project meeting training session #3 was held and was dedicated to detailed presentation of developed algorithms. In the evening of the first meeting day the partner enjoyed a tour through Padua and the Basilica di Sant’ Antonio.

 

December 2011, Master student Daniele Alberton won the prize “inTESI 2011″ for his master thesis “Sistema di visione industriale per il controllo qualità in 3D (Industrial vision system for 3D quality inspection)”, with supervisor Prof. Emanuele Menegatti from University of Padua, related to the 3DComplete Project.

 

November 2011, publication of an article about 3D Complete in an Italian robotics magazine. This issue was especially related to “Robotica 2011”, the robotics fair Univeristy of Padua attended in Milan on 16-19th November.

 

5th & 6th of October 2011, Project meeting & Training Session #2 at Ardoran, Hiiumaa, Estonia

The first day of this project meeting was dedicated to technical exhange. All partners persented the actual status of their work.

The second day of the meeting was dedicated to the training session 2 and dealed with interfaces to the libraries of the SME partners.

In the evening of the first meeting day the partners enjoyed a visiting tour through Hiiumaa.

 

 

 

 

 

27th & 28th of April 2011, Project meeting at Prodintec, Gijon, Spain

This meeting was focused on an exchange of actual technical results as well as information about administrative issues. All partners presented the actual status of their work and the integration of technologies with respect to the requirments of the SME partners were discussed.  The project partners agreed to present two prototyes at the Control Fair.

In the evening of the first meeting day the partners enjoyed a beautiful sightsseing tour through Gijon.

 

 

 

 

 

19th of June 2011, Review meeting at EC, Brusseles, Belgium. All partners met at Brussels to present the actual results gained since the start of the project and to give an overview on the work planned until the end of the project to our EC officer and the project reviser.

 

14th & 15th of December 2010, Project meeting and Training Session #1 at UniPD, Padua, Italy
This very productive meeting was focused on technical exchange and discussions about test cases.  Further more the  printed versions of the project leaflets were distributed mongst all partners and a proposal of test cases were presented and finally agreed by all partners.

During the meeting we decided to persent the project results at Control Fair 2012 in Stuttgart, Germany.

The second day was dedicated to the first out of three training sessions and was focused on the basics of the involved technologies.

In the evening of the first meeting day the partners enjoyed a tour through the city of Padua and the famos Cappella degli Scrovegni.

 

 

30th of November 2010, the 3DComplete project submitted its first deliverable.

 

14th & 15th of September 2010, KickOff at Profactor, Steyr, Austria
Two weeks after the official start of the project the consortium met together at Profactor in Steyr. The meeting was dedicated to an exchange of information about administrative and technical topics. A project logo and  the project web site were persented and finally agreed by all partners.

In the evening of the first meeting day the partners enjoyed a cold but exciting “Nightwatcher’s Dine-around” tour through the city center of Steyr.